By Steve Heiden
Conduct an annual safety check on holiday lights before installing them.
Holiday lights can brighten the season – literally and emotionally – but they also present potential risk for fire and shock hazards. Before installing holiday lighting, take extra time to do a safety check to protect people and property.
Holiday lights and other decorative lighting contribute to an estimated 150 home structure fires per year, according to the National Fire Protection Association, with an average of nine deaths, 16 injuries and $8.4 million in direct property damage per year. Electrical failures or malfunctions were factors in 64 percent of the fires.
Reduce the risk of fire and shock from holiday lights by taking these steps recommended by the Consumer Product Safety Commission:
- Use indoor and outdoor lights that conform with safety standards and that have been tested for safety by a recognized testing laboratory.
- Use only lights that have plugs containing fuses.
- Check each set of lights, new or old, for broken or cracked sockets, frayed or bare wires or loose connections. Throw out damaged sets. Always replace burned-out bulbs promptly with the same wattage bulbs.
- Ensure extension cords are rated for the intended use.
- Forego electric lights on a metallic tree. The tree can become charged with electricity from faulty lights, and a person touching a branch could be electrocuted.
- Check labels before using lights outdoors to be sure they have been certified for outdoor use.
- Stay away from power or feeder lines leading from utility poles.
- Fasten outdoor lights securely to trees, house walls or other firm supports to protect the lights from wind damage. Use only insulated staples (not nails or tacks) to hold strings in place. Or, run strings of lights through hooks (available at hardware stores).
- Turn off all holiday lights when you go to bed or leave the house.
- Use caution when removing outdoor holiday lights. Never pull or tug on lights – this could cause stress on the connections that could create a fire hazard.
- Plug outdoor electric lights and decorations into circuits protected by ground-fault circuit interrupters (GFCIs) to protect against electric shock. Portable outdoor GFCIs can be purchased where electrical supplies are sold. GFCIs can also be installed permanently to household circuits by a qualified electrician.
The U.S. Department of Energy recommends switching to LED lights to reduce heat and the risk of combustion or burnt fingers. In addition to being sturdier and more resistant to breakage, <a target=_blank href="http://www.energy.gov/energysaver/articles/led-lighting" …read more
Cincinnati Insurance Company Blog: Cincinnati Insurance Company